Oil stain

Advantages

• Suitable not only for wood, but also for other microporous surfaces;
• Allows wood to breathe, reduces swelling and shrinkage;
• The dried surface is safe for humans and animals according to EN 71.3;
• Resistant to saliva and sweat according to DIN 53160.

Instructions for use

1. Apply a very thin layer to the wood surface (you can use a sponge, oil applicator, Easy Pad, metal spatula, roller, brush or polishing machine, depending on the area you are going to cover).;
2. After application, thoroughly wipe off excess oil from the surface with a clean cloth or paper towel;
3. Allow the surface to dry for approximately 12 hours, ensuring good ventilation;
4. If a more intense shade is desired, apply a second coat of the desired color with a roller or brush;
5. Apply a thin and even layer and leave to dry (no need to wipe off excess);
6. Ensure good ventilation;
7. Corrections can be made within 30 minutes of the start of coating;
8. It is advisable to clean tools with Osmo thinner and brush cleaner (without aromatic compounds) or with white spirit.

Note: For surfaces subject to heavy use, a clear protective layer is required. It is advisable to use Osmo Hardwax-Oil.

Drying time

Drying time – approx. 12 hours (under normal weather conditions, 23 °C temp. and 50 % relative humidity). Low temperatures and/or higher humidity may extend the drying time. Ensure good ventilation. After 2 – 3 weeks, the surface is fully mature and hardened.

Coverage

1 liter covers approx. 24 - 48 m² in one coat. The coverage of the product depends largely on the type of wood selected and its characteristics. The yield given is calculated for smooth sanded wood.