Oil for concrete

Advantages

• Transparent, silk-gloss concrete finish;
• Based on natural oils and waxes;
• Resistant to dirt, water and abrasion;
• Simple application – no primer or intermediate sanding;
• Suitable for concrete, stone and tiles (unglazed).

Instructions for use

1. The surface must be microporous, absorbent, clean, dry and not frozen;
2. Mix well before use (shaking the container is not enough);
3. Perform a test application on a smaller area;
4. Apply a very thin layer to the surface (you can use a sponge, oil applicator, Easy Pad, roller, brush or polishing machine, depending on the area you are going to cover);
5. After application, thoroughly wipe off excess oil from the surface with a clean cloth or paper towel;
6. Allow the surface to dry for approximately 8-10 hours, ensuring good ventilation;
7. When renovating or re-oiling already oiled surfaces, one coat of oil on a clean and dry surface is usually sufficient;
8. Apply the second layer in the same way as the first layer.

Note: We recommend testing the product on a small area before applying it to the entire surface. The product is suitable for use for up to 5 years and longer if the container is dry and tightly closed. If the product thickens due to freezing, store at room temperature for 24-36 hours before using the product.

Coverage

50 m²/l per coat, depending on surface characteristics.

Carefully

Keep out of reach of children. Avoid contact with eyes, skin or clothing. Contains 2-butanone oxime. May cause an allergic reaction. If medical advice is needed, have product container or label at hand. For indoor use only and in a well-ventilated area. Warning: Wash any used fabrics that have been impregnated with this product immediately after use or store in an airtight container (risk of spontaneous combustion). Safety data sheet available on request. Risk of spontaneous combustion! Polishing pads, brushes, rollers or other tools must be sealed in airtight metal containers.